MF RB Series Round Balers - Fixed Chamber Range - ProTec

Massey Ferguson RB 3130F Protec (Protection baler & Professional Technology) combines all the benefits of a fixed chamber baler with the addition of an integrated wrapper device for baling and wrapping on the go. Bales are instantly protected from changeable weather and forage quality is preserved, freeing up the operator to stack or transport bales or begin harvesting in another field.

Current Offers & Promotions

No Results Found

Key Benefits

Technology & Innovation

Spiral Bale Chamber

Spiral Bale Chamber

The new, improved chamber has a ‘spiral’ form with slightly reduced diameter at the front thus improving feeding and bale rotation, increasing density and net grip when wrapping.

Xtracut

Xtracut

Designed for optimum performance, Massey Ferguson Xtracut can be equipped with 13, 17 or 25 knives. Cutter units are fitted with the longest knives on the market, making sure that no material will pass through uncut.

Xtracut Knife Banks

Xtracut Knife Banks

Xtracut 17 and 25 feature two sets of hydraulically operated knife banks with separate control from the cab depending on customer requirements. The operator can select: a single knife bank, both knife banks or disengagement of all knives.

Powergrip Rollers

Powergrip Rollers

The bale chamber is made up of 18 Powergrip rollers which ensure an effective grasp and quicker bale rotation for higher density and improved bale shape.

Powergrip Roller Tubes

Powergrip Roller Tubes

Rollers with 10 ribs are made from a seamless solid tube. They are the industry benchmark for durability and performance, known for their proven design and capability to withstand the harshest environments.

Hydroflexcontrol

Hydroflexcontrol

To maximise efficiency in the field and minimise downtime from crop blockages, the MF Round balers are fitted with the unique Hydroflexcontrol protection system which works in two stages:

Hydroflexcontrol - Stage 1

Hydroflexcontrol - Stage 1

The first stage of Hydroflexcontrol allows movement of the front part of the feed chamber floor and will automatically prevent up to 80% of potential blockages and will keep you going without unnecessary downtime.

Hydroflexcontrol - Stage 2

Hydroflexcontrol - Stage 2

Should a major blockage occur, stage two of hydroflexcontrol is activated by the operator, and is cleared by lowering the rear of the feed table floor hydraulically from the cab, allowing for material to easily pass through, therefore minimizing downtime.

Rapid Reload System

Rapid Reload System

Fitted as standard, the Rapid Reload System allows one spare roll to be carried on the baler. Roll replacement can be made in a matter of minutes, thus extending your time in the field and increasing output.

ProTec Control Panel

ProTec Control Panel

An external control panel on the back of the baler allows control of the tailgate, wrapping ring and table and the film clamps for easy film roll change, maintenance or cleaning.

ProTec Transport Mode

ProTec Transport Mode

In transport mode the wrapper ring is folded forwards, reducing the overall machine length to just 5.9m for safer transport and improved manoeuvrability.

ProTec Guiding Plates

ProTec Guiding Plates

In addition to the transfer arm, the new design features two active guiding plates on both sides of the baler clearly directing the bale to the centre of the wrapper plate allowing for a faster and more secure transfer cycle.

Net & Film tying unit

Net & Film tying unit

A new comfortable load & reload system for fast-switching between 3 rolls of Net or Film. Film tying offers perfect, persistent bale shape, less feed losses & higher protection. Binding & wrapping film can be disposed together.

On board wash tank

On board wash tank

A new wash tank is now available and so useful to clean hands after replacing net or film roll, with integrated soap spender in the lid also to keep the tractor cab always clean.

New light kit with LED

New light kit with LED

For more comfort, safety and productivity, a new kit of 3 led lights is now available on Protec models, with one spot for wrapping unit and 2 spots unterneath the side panels: to work day and night at your convenience, following your needs!

Floating bale tipper

Floating bale tipper

The ProTec-bale-tipper is supported by a spring stamp providing suspensive relief support. It’s linked to the machine like tractors common lower link hooks & is folded into transport position by one click on your handset.

Varionet Net Wrapping System

Varionet Net Wrapping System

The tried and tested Varionet net wrapping system features a special net tensioning and spreading device that is capable of dealing with various widths and types of net allowing for fast wrapping of bales from edge to edge or over the edge.

ProTec Bale Wrapping

ProTec Bale Wrapping

Once the bale is transferred to the centre of the wrapper table, a hydraulically driven wrapper ring begins its rotation even before the tailgate is fully closed, completing the cycle well before the next bale is formed.

Round Balers - Pick-Up Position

Round Balers - Pick-Up Position

On the MF round balers, the pick-up is positioned very closely to the rotor, therefore improving crop flow and reducing the risk of blockage.

ProTec Wrapper Table

ProTec Wrapper Table

The hydraulically driven wrapper table consists of two rollers and three endless belts mounted on a welded frame for extra durability.

ProTec Wrapper Table Sensor

ProTec Wrapper Table Sensor

A sensor underneath the middle belt will allow for wrapping to begin only after the bale is fully positioned on the table, while four large side support rollers keep the bale centred while wrapping.

ProTec Tyres

ProTec Tyres

Massey Ferguson Protec range is equipped with large low-pressure tyres for reducing ground compaction. They permit greater stability and manoeuvrability on headlands without damaging turf also during very wet conditions.

ProTec Film Roll Holders

ProTec Film Roll Holders

Twelve film roll holders are conveniently located at a comfortable height on both sides of the baler and with two additional rolls installed on the wrapper, increase uptime in the field.

ProTec Bale Discharge

ProTec Bale Discharge

To ensure gentle bale unloading, the wrapping table is lowered, thus minimising the bale’s rolling speed, preventing film damage and maintaining the ideal bale shape.

Cam-Less Pick-Up

Cam-Less Pick-Up

Higher operating speeds are possible with the MF cam-less pick-up design. With fewer moving parts, the cam-less pick-up is quieter, simpler and more reliable. Low maintenance and less adjustments save time and increase productivity.

ProTec Wrapping Ring

ProTec Wrapping Ring

The wrapping ring is driven by a set of two rubber rollers, ensuring plenty of gripping surface, eliminating slippage and reducing noise levels.

Five Tine Bars

Five Tine Bars

The pick-up system has five tine bars with each one being spaced only 64mm apart, providing higher capacity and a smoother even feed at high speed.

ProTec Robust Frame

ProTec Robust Frame

Designed to withstand the heaviest bale loads, the robust frame with its quiet running gear operates at up to 35 rpm smoothly for trouble free wrapping, bale after bale.

Optional Bale Tipper

Optional Bale Tipper

An optional bale tipper puts bales on their ends, preventing them from rolling away and making for easier loading on the trailer. The operator can also choose between automatic and manual unloading modes.

The number of unique and patented features make our balers stand out from the crowd. Massey Ferguson ProTec is offered either with our E-Link Pro console, or with ISOBUS. They both have the same simple menu navigation, developed to ensure professional baling as well as advanced process monitoring by the operator.
ISOBUS

ISOBUS

Utilising a single in-cab terminal in the tractor for all implements reduces cab clutter and can make for simpler and more accurate control by drivers who may carry out a wide range of operations with different machines.

New Bale Control Pro monitor

New Bale Control Pro monitor

The MF RB 3130F is available with the Bale Control terminal as standard; the Bale Control Pro monitor with ISOBUS technology is optional for the MF RB 3130F Xtracut; Balers can also be specified with an ISOBUS connection for utilising tractor monitors.

Centralized Grease Banks

Centralized Grease Banks

Regular and sufficient lubrication of roller bearings is extremely important, particularly in adverse conditions. Centralized grease banks for roller bearing lubrication are located in convenient positions for easier access and reduced service time.

Powersplit Gearbox

Powersplit Gearbox

The Powersplit gearbox equally divides and transfers power to drive the rotor unit on one side and the roller drives on the other, reducing the overall power requirements by simplifying the drivelines.

Automatic Chain Lubrication

Automatic Chain Lubrication

Automatic chain lubrication with individual adjustment for each chain guarantees sufficient oil supply, reduces maintenance time and extends chain service life. For added durability the highest quality chains are used throughout the baler.

Bearing Housing Design

Bearing Housing Design

The bale chamber can experience extreme loads with forces from all directions. The clever bearing housing design allows some movement of the rollers to eliminate major axial loads occurring during operation.

Available Models

Model

Chamber diameter (m)

Chamber Width (m)

Pick-Up Width (m)

Approximate weight (kg)

MF RB 3130F PROTEC 1.25 1.23 2.25 / 2.6 5,990
BUILD MY MASSEY FERGUSON

BUILD MY MASSEY FERGUSON

You can Print, Email or Share your own custom quote. Start building your Massey Ferguson by clicking on the button below.

Find out more

Customer Reviews & Testimonials

Kevin Heywood

Kevin Heywood

“We have been so impressed by the new baler-wrapper and the service from the dealer, that we feel confident now to look at other Massey Ferguson grass harvesting products when our current machines are due for updating.”

Read Full Testimonial

Find a Dealer