• Unique ‘centre line’ design in which the crop flows quickly, with minimum damage, through the baler in a straight line – for smooth operation and easy transport.

• With the same field and road positions, operators can just pull into the field, lower the pick-up and start baling – no time consuming manhandling required!

• The wide pick-up (1.5 m – 2.0 m) features a small diameter, ‘low profile’ design with closely spaced tines - ensures windrows are picked up cleanly with minimal disturbance and leaf loss.

• Using a key feature from its big square baler cousins, the crop is pre-compressed into a slice in the pre-forming chamber before entering the bale chamber – this pre-formed slice concept enables the baler to operate with a shorter plunger stroke, significantly reducing plunger bearing wear. 

• Shorter plunger stroke means plunger speed can be increased giving boosted capacity and higher productivity.

• Rugged knotters are designed and built to operate reliably over many years with minimum fuss or maintenance, whether using plastic or sisal twine.

• With the centre line design, tractor PTO requirements are kept as low as possible - only 30 PTO hp on the MF 1835 and 35 PTO hp on the MF 1837 and MF 1839.